1
Clamp In
Push Barry's main clamp down over the lip of your wheelbarrow and screw in the large hand-bolt to lock it in place. No tools needed.
Read customer setupsSpend your energy on the craft, not on battling a barrow onto a roof rack.
Gavin — tradesman, 37 years
Auxiliary Plate Holder
The hitch-mounted barrow carrier. Loaded in under a minute, no lifting over your head.
30-day money-back guarantee. If it's not for you, send it back.
30-day money-back
Ships within a week
Flat $35 AU-wide
Specifications
- Powder-coated steel build
- Weight: 11.3kg — packaged in kit form
- 3mm thick steel cradle brackets, 3-point lashing system
- Fits a standard 2-inch tow hitch receiver
- 2-part fixing system, pin and R-clip retainer
- Large hand-bolt for easy clamp tightening
- 3 length settings to reduce rear overhang
- 2× red rear reflectors, safe rounded edges
Will it fit?
Barry is designed for a standard 2-inch tow hitch receiver — ute, van, car, 4WD or trailer. If your towbar has a smaller receiver, Barry won't fit as supplied. Not sure what size yours is? Send us a photo and we'll confirm before you buy.
Carries most wheelbarrows; the exception is square-fronted barrows, which may not slot into Barry's lower cradle.
Barry covers most centrally-mounted number plates, which is why we offer the Auxiliary Plate Holder.
Shipping & returns
Flat $35 shipping Australia-wide. Orders ship within a week of purchase.
30-day money-back guarantee — if you're not happy for any reason, send it back.
Full description
Keep your rego visible and road-legal while Barry is loaded. Mounts your auxiliary number plate at the rear of the vehicle.
Source your auxiliary plate from your State/Territory's transport department.
Why Blokes Buy It
What Barry actually fixes
0
Lifts overhead
The barrow never goes above your shoulders again.
100%
Tray freed up
Your whole tray back for tools and materials.
2
Steps to load
Clamp it in, pin it off. No tools needed.
11.3kg
Chuck-in weight
Light enough one-handed, solid at highway speed.
Customer Setups
Straight from the job site
★★★★★"Works amazing. Great people to deal with as well."
Brendon
★★★★★"We purchased a tow hitch extension and it's worked out a treat for us. Here's a photo of Barry in action!"
Kenneth
★★★★★"My husband is very happy with it. It has definitely made his life easier and would recommend to everyone."
Kristy
★★★★★"Such a great product — we have already done a few bog laps through the Bunnings car park to make the other tradies jealous."
Wayne
How It Works
Clamp in. Secure. 2 Simple Steps
2
Secure
Drop in the pin and R-clip to lock it off, throw the included rated tie-down strap over, and you're on your way.
The Alternatives
How else are you carting it?
| Barry | Roof rack | In the tray | Trailer | |
|---|---|---|---|---|
| No lifting overhead | ✓ | — | — | ✓ |
| Tray stays free for tools | ✓ | ✓ | — | ✓ |
| Loads in under a minute | ✓ | — | — | — |
| Nothing extra to tow or park | ✓ | ✓ | ✓ | — |
| Rated tie-down included | ✓ | — | — | — |
| No rego or registration costs | ✓ | ✓ | ✓ | — |
| Uses your existing 2-inch towbar | ✓ | — | — | — |
30-Second Check
Will it fit?
Answer two questions. That's the whole checklist.
1 — Does your vehicle (or trailer) have a 2-inch tow hitch receiver?
2 — Is your wheelbarrow square-fronted?
Barry fits. Easy. A standard 2-inch receiver and a standard barrow is all it takes. Three length settings let you manage rear overhang.
Worth checking first. Barry is built for a standard 2-inch tow hitch receiver. If you haven't got one, most towbar fitters can install one — and if you're not sure what size yours is, send us a photo and we'll tell you straight.
Check your barrow first. Square-fronted barrows may not slot into Barry's lower cradle depending on size. Send us a photo of your barrow and we'll confirm before you buy.
You're almost certainly good. If your barrow has a standard rounded front lip, Barry fits. Not sure? Send us a photo and we'll confirm.
Who's Behind Barry
Built by a bloke who's carried a barrow for 37 years
Gavin has been a tradesman for 37 years and a registered builder for 21 of them. Decades of 4am starts and 40-degree days taught him one thing: spend your energy on the craft, not on battling a barrow onto a roof rack.
Barry is his answer — a dedicated tie-off point for the trade's most awkward, most essential tool. Designed on the job, by someone who uses it every day.
— Gavin
No Risk
Try it. If it's not for you, send it back
Bolt Barry to your hitch, load your barrow, run it for a month. If it doesn't save you time and back-ache, we'll refund you — no forms, no interrogation.
Get Barry — $279✓ 30-day money-back guarantee✓ Flat $35 shipping Australia-wide✓ Ships within a week
Questions
Before you ask
Can Barry hold any wheelbarrow?
Barry holds barrows of all sizes. The only exception is square-fronted barrows, which depending on size may not slot into Barry's lower cradle.
Does Barry cover my number plate?
Barry will cover most centrally-mounted number plates. That's exactly why we offer the Auxiliary Plate Holder — grab the Complete Kit and source an auxiliary plate from your state or territory's transport department, and you're road-legal.
Can I attach Barry to my trailer?
Yes — with a 2-inch auxiliary hitch receiver. Check your state or territory's vehicle equipment regulations to make sure you comply.
Will Barry fit my vehicle?
Barry is designed for a standard 2-inch tow hitch receiver — ute, van, car or 4WD. If your towbar has a smaller receiver, Barry won't fit as supplied. Not sure what size yours is? Send us a photo and we'll confirm before you buy.
What if it's not for me?
We stand by the quality of our products. If you're not happy for any reason, we offer a 30-day money-back guarantee.
Auxiliary Plate Holder
$49.50
