Barry wheelbarrow carrier mounted in a tow hitch receiver, holding a wheelbarrow vertically

Spend your energy on the craft, not on battling a barrow onto a roof rack.

Gavin — tradesman, 37 years
Read customer setups

BARRY — The Barrow Carry

The hitch-mounted barrow carrier. Loaded in under a minute, no lifting over your head.

Step 1 — Choose your setup

Flat $35 shipping Australia-wide · Ships within a week

30-day money-back guarantee. If it's not for you, send it back.

30-day money-back
Ships within a week
Flat $35 AU-wide
Specifications
  • Powder-coated steel build
  • Weight: 11.3kg — packaged in kit form
  • 3mm thick steel cradle brackets, 3-point lashing system
  • Fits a standard 2-inch tow hitch receiver
  • 2-part fixing system, pin and R-clip retainer
  • Large hand-bolt for easy clamp tightening
  • 3 length settings to reduce rear overhang
  • 2× red rear reflectors, safe rounded edges
Will it fit?

Barry is designed for a standard 2-inch tow hitch receiver — ute, van, car, 4WD or trailer. If your towbar has a smaller receiver, Barry won't fit as supplied. Not sure what size yours is? Send us a photo and we'll confirm before you buy.

Carries most wheelbarrows; the exception is square-fronted barrows, which may not slot into Barry's lower cradle.

Barry covers most centrally-mounted number plates, which is why we offer the Auxiliary Plate Holder.

Shipping & returns

Flat $35 shipping Australia-wide. Orders ship within a week of purchase.

30-day money-back guarantee — if you're not happy for any reason, send it back.

Full description

Wheelbarrow lifter and carrier that attaches to your vehicle's tow hitch.

  • Powder-coated steel build — 11.3kg
  • Simple clamp and pin mechanism — no lifting over your head
  • Fits 2-inch tow hitch receivers; 3 length settings to reduce rear overhang
  • Carries most wheelbarrows (square-fronted barrows excepted)
  • Rated tie-down strap included, 2× red rear reflectors, safe rounded edges
  • Packaged in kit form — ships within a week

30-day money-back guarantee. Flat $35 shipping Australia-wide.

Note: auxiliary plate holder, wheelbarrow and vehicle not included.

Why Blokes Buy It

What Barry actually fixes

0

Lifts overhead

The barrow never goes above your shoulders again.

100%

Tray freed up

Your whole tray back for tools and materials.

2

Steps to load

Clamp it in, pin it off. No tools needed.

11.3kg

Chuck-in weight

Light enough one-handed, solid at highway speed.

Customer Setups

Straight from the job site

★★★★★

"Works amazing. Great people to deal with as well."

Brendon
★★★★★

"We purchased a tow hitch extension and it's worked out a treat for us. Here's a photo of Barry in action!"

Kenneth
★★★★★

"My husband is very happy with it. It has definitely made his life easier and would recommend to everyone."

Kristy
★★★★★

"Such a great product — we have already done a few bog laps through the Bunnings car park to make the other tradies jealous."

Wayne
How It Works

Clamp in. Secure. 2 Simple Steps

1

Clamp In

Push Barry's main clamp down over the lip of your wheelbarrow and screw in the large hand-bolt to lock it in place. No tools needed.

2

Secure

Drop in the pin and R-clip to lock it off, throw the included rated tie-down strap over, and you're on your way.

The Alternatives

How else are you carting it?

Barry Roof rack In the tray Trailer
No lifting overhead
Tray stays free for tools
Loads in under a minute
Nothing extra to tow or park
Rated tie-down included
No rego or registration costs
Uses your existing 2-inch towbar
30-Second Check

Will it fit?

Answer two questions. That's the whole checklist.

1 — Does your vehicle (or trailer) have a 2-inch tow hitch receiver?

2 — Is your wheelbarrow square-fronted?

Gavin, founder of Barry, standing in his workshop wearing a leather tool belt with arms crossed
Who's Behind Barry

Built by a bloke who's carried a barrow for 37 years

Gavin has been a tradesman for 37 years and a registered builder for 21 of them. Decades of 4am starts and 40-degree days taught him one thing: spend your energy on the craft, not on battling a barrow onto a roof rack.

Barry is his answer — a dedicated tie-off point for the trade's most awkward, most essential tool. Designed on the job, by someone who uses it every day.

— Gavin

No Risk

Try it. If it's not for you, send it back

Bolt Barry to your hitch, load your barrow, run it for a month. If it doesn't save you time and back-ache, we'll refund you — no forms, no interrogation.

Get Barry — $279
✓ 30-day money-back guarantee✓ Flat $35 shipping Australia-wide✓ Ships within a week
Questions

Before you ask

Can Barry hold any wheelbarrow?

Barry holds barrows of all sizes. The only exception is square-fronted barrows, which depending on size may not slot into Barry's lower cradle.

Does Barry cover my number plate?

Barry will cover most centrally-mounted number plates. That's exactly why we offer the Auxiliary Plate Holder — grab the Complete Kit and source an auxiliary plate from your state or territory's transport department, and you're road-legal.

Can I attach Barry to my trailer?

Yes — with a 2-inch auxiliary hitch receiver. Check your state or territory's vehicle equipment regulations to make sure you comply.

Will Barry fit my vehicle?

Barry is designed for a standard 2-inch tow hitch receiver — ute, van, car or 4WD. If your towbar has a smaller receiver, Barry won't fit as supplied. Not sure what size yours is? Send us a photo and we'll confirm before you buy.

What if it's not for me?

We stand by the quality of our products. If you're not happy for any reason, we offer a 30-day money-back guarantee.